Actiontec T3200M DNS Changing issue..

Reply

This thread's discussion is locked. If it doesn't give you the information you need, head to its forum board for active discussions or to start a new discussion.

nickc0099
Resident
Hey guys, I've got the actiontec t3200m gateway and was wondering how I would go about changing my dns address. I've got an American DNS address I use, and would like to use that one, I've tried manually changing it and selecting statically assigned, but doing just that didnt work. Any ideas?
Community Power User
Community Power User
In your modem under advanced setup>Wan IP addressing>Under 4. (Static DNS address) Primary and secondary then save. Reboot the modem.

If you’re using the DNS as a geolocation workaround. Keep in mind if you have IPV6 enabled most times till will render your “spoof dns” useless (will geo locate you) IPV6 will need be disabled and only use IPV4.

Under advanced settings>IPv6 wan settings>Set the IPv6 state (disabled) and apply.

Find a post useful, please click on "Like" to give the author recognition or mark as an accepted solution.
nickc0099
Resident
If having the ipv6 disabled, will optik tv and Internet still be fine using v4 only?