01-18-2022 08:09 PM
I have a telus T3200m router and I have been having problems with port forwarding on it for over a year now (see below link for info). Regardless, if I wanted to upgrade my router, what could I do to make sure optik TV still works, but also make the new router work (and hopefully be able to forward ports). I have fibre internet by the way. My I don't have a lot of knowledge about this type of thing, but if anyone knows how I could go about this I'd love to know. If I can't upgrade please refer to this post https://forum.telus.com/t5/Internet-Home-Phone/Port-Forwarding-no-longer-works-on-my-T3200M/m-p/1176...
Thanks in advance.
Solved! Go to Solution.
01-18-2022 09:33 PM
In the linked thread there was a suggestion by @Upcraft to do a factory reset and you didn't reply as to whether you tried that or not.
01-18-2022 09:12 PM
Some folks have put a switch between the Fibre ONT and the T3200M and a router of their choosing. Then put Optik on the T3200M and the rest of the network on the other router.
01-18-2022 11:00 PM
Below my router, there's a box that the fiber cable goes in, and there is an Ethernet cable coming out of it. This ethernet cable plugs in to the T3200m. There are three unused ethernet ports on the box that the fiber cable goes into. Could I just plug a router into one of these?
01-19-2022 02:03 AM
No. Only the one port is active on the fibre box. The only way to connect a third party router to that box is if you place a gigabit switch between it and the routers. You would end up with two separate networks. It would look like this:
01-19-2022 01:09 PM
04-09-2022 12:23 PM
01-18-2022 09:33 PM
In the linked thread there was a suggestion by @Upcraft to do a factory reset and you didn't reply as to whether you tried that or not.
01-18-2022 10:54 PM
I have tried that, no luck. I never actually saw that comment, but I have done it and it didn't work.