Stateless DHCP Not Working

[Underdoug]

Enabled IPV6  on my router, with statless DHCP.  My windows clients are not assigned an IPV6 address.  The T3200M does acquire an IPV6 wan address.

Model#:	T3200M
Firmware Version:	31.164L.18

It will work with statefull DHCP, but that is not how I would like my network configured.

[Underdoug]

Lame,   turns out the router needs to be rebooted after any change to ipv6 configuration.  so if you make a change to anything ipv6, dns, DHCP, etc.  just reboot.