10-21-2020 06:55 PM
My modem is mounted in the garage and connected to fibre and coaxial cable. There is an ECB6200 MOCA adapter in the house that is connected to an Actiontec WEB6000Q extender. I want to remove the extender, bridge the modem and plug my own router into the MOCA adapter in the house. I can't bridge port one on the T3200M as there's nothing plugged in there to bridge. I chatted with tech support today and they tried to help, but this was more technical than front line. Any help here ?
10-21-2020 07:10 PM
I'm not sure what your setup or use will be on the new router but I had a third party router connected to a T3200M and did not bridge the T3200M. Worked fine for my needs at least. That includes PC gaming. If you have the router already, have you tried just hooking it up? You may need to change the IP range on the second router depending on if it defaults to 192.168.1.x.
10-21-2020 07:22 PM
I thought about just plugging my router into the MOCA, but then I would be running a double local network. It just seemed simpler to have the T3200M be just a modem and supply WAN IP to my router. That's how I ran my Shaw internet for years before I switched to Telus last month.
10-21-2020 07:22 PM
You need another MoCA adapter in the garage so that you can plug an Ethernet cable into port 1.
10-21-2020 07:31 PM
I went to the garage and had another look. The T3200M seems to be a MOCA adapter and an ONT. The fibre and the coaxial cable go straight into it. I don't know what another MOCA would do?
10-21-2020 07:32 PM
10-23-2020 01:40 PM
I have a tech coming to move the modem into the house. It seems like a bad idea to have something hanging on the wall of my garage anyway. Its pretty dusty in there.