Telus TV remote codes

Some older Sharp Aquos TV's actually respond to codes originally designed for Denon/Pioneer receivers, as they shared certain IR libraries back in the day. This at least gives us a few more codes to try that potentially may work:

 

1081

1009

1165

1004

 

If those don't do the trick either, the next step is a Power Search. This forces the TELUS remote to literally cycle through its entire internal library of codes one by one.

 

1. Turn your Sharp TV on.

2. Press and hold the Options button for 3 seconds until you see the little green light flash twice.

3. Enter code 0002. (you should see the light flash twice again)

4. Press the CH+ button repeatedly *but slowly*. Each press is sending a 'power off' command to your TV.

5. Stop immediately the moment your TV turns off.

6. Press the Power button on the remote to turn your TV back on, then press OK to lock the code in.

 

If this doesn't work after roughly 50 tries of step 4, it's likely that the hardware between your remote and your older TV simply won't work. One last note is that if you have HDMI-CEC (I believe Sharp calls this 'Aquos Link') enabled in your TV's menu settings, our TELUS box can often control the TV's power and volume through the HDMI cable itself, bypassing the need for you to even need a remote code. 

 

Let us know if that works!