Forum Discussion
Solved
Bridging customer owned routers to Telus router/equipment
With reference to this old thread from the Telus com forum: https://forum.telus.com/t5/Home/Bridge-Mode-Using-Your-Own-Router/ta-p/52181#:~:text=What%20Is%20Bridge%20Mode%3F,party%20router%20in%...
But does the NH20A have 2.5G LAN I/O? I don't think it does. In a modem AP config you connect the modem LAN to the AP's WAN? But I was always under the impression that you connected a gateway device to a AP via LAN to LAN. due to the fact that a gateway like the T3200M is a modem and a router, so router to router via LAN-LAN. That's the way I have my AX11000 connected to the T3200 at this moment, in AP mode and all seems well. I always had my WRT32X connected in AP mode to the T3200M, that way also.
But does the NH20A have 2.5G LAN I/O? I don't think it does. In a modem AP config you connect the modem LAN to the AP's WAN? But I was always under the impression that you connected a gateway device to a AP via LAN to LAN. due to the fact that a gateway like the T3200M is a modem and a router, so router to router via LAN-LAN. That's the way I have my AX11000 connected to the T3200 at this moment, in AP mode and all seems well. I always had my WRT32X connected in AP mode to the T3200M, that way also.
Yes it does have a 10Gbe WAN I/O.
And you can connect a router to router via LAN-to-LAN or LAN-to-WAN. Your choice.
