Forum Discussion
canuck123
6 years agoOrganizer
Bridge mode vs using a switch for 3rd party router
What are the advantages/disadvantages for both methods? Which would provide faster speeds?
Method 1:
ONT >>> 5 Port switch
From the 5 port switch:
Port 1 >>> T3200M >>> Telus Optik TV Boxes x 3
Port 2 >>> My Own Router >>> All devices on my network
Method 2:
Bridging port 1 on T3200M and using 3rd party router on there with all network to the 3rd party router and leaving optik boxes on T3200M.
Basically I was wondering why/how using a gigabit switch is more optimal to using the T3200M in bridge mode from the fibre ONT.
Method 1:
ONT >>> 5 Port switch
From the 5 port switch:
Port 1 >>> T3200M >>> Telus Optik TV Boxes x 3
Port 2 >>> My Own Router >>> All devices on my network
Method 2:
Bridging port 1 on T3200M and using 3rd party router on there with all network to the 3rd party router and leaving optik boxes on T3200M.
Basically I was wondering why/how using a gigabit switch is more optimal to using the T3200M in bridge mode from the fibre ONT.
There should be little speed difference, but here are a few things to remember:
- your routers will each draw their own IP address from Telus DHCP, meaning your TV will not be connected to the same local network as the rest of your devices
- gigabit speeds are more about serving multiple users with a satisfactory speed quality than one user with outstanding speed - most servers delivering content can’t meet gigabit speeds to the network.
2 Replies
Replies have been turned off for this discussion
- NFtoBC
Community Power User
There should be little speed difference, but here are a few things to remember:
- your routers will each draw their own IP address from Telus DHCP, meaning your TV will not be connected to the same local network as the rest of your devices
- gigabit speeds are more about serving multiple users with a satisfactory speed quality than one user with outstanding speed - most servers delivering content can’t meet gigabit speeds to the network.
- xrayHero
Also, if the Optik boxes are not on the same network as your other devices you won't be able to use the TELUS Home Assistant functions.