Forum Discussion
Solved
T3200M SSID isolation - can't change setting
I have been tearing my hair out over this... does anyone have any suggestions? T3200M has port 1 bridging to my own router (connected to VPN), so have to use Actiontec gateway to access my home s...
I'm hesitant to do that.. I have had experiences where the returning to a "default" setting created chaos
I took the VPN off my Port 1 router (and started using a Windows app), so all is good.
Thank you for your helpfulness,xray
A couple of things to try:
- Try turning off the guest network to see if that enables the SSID Isolation setting on the main WiFi.
- Is SmartSteering turned on? Try turning it off to see if you have access to the SSID Isolation setting. I've seen reports off a bug similar to this associated with the SmartSteering setting.
Thank you for the suggestions, but both did not make a difference. 😞
What firmware version is on the T3200M? I'm on 31.164L.18
My setting is on disable and I cannot change it.
Well, at least I now know that is the default setting. Seems backward to me. This also can affect printer discovery, unless there is another setting somewhere else that allows a wifi connected laptop to see other computers and printers.
- Me too.
