cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

T3200 and my own mesh wifi

janetylau
Neighbour

Not tech savvy at all so looking for help. I have the T3200 modem installed into the garage and an Actiontec attached by coax cables on the main floor that has an ethernet cable attached to a Telus router (or extender?). I am wondering if it was possible to attach the ethernet cable to my own router (D-Link DIR-L1900 Mesh router) and connect all my devices wireless that way. What do I need to do so that I don't see both wifi signals from my T3200 modem and also the wifi coming out of my mesh?

1 ACCEPTED SOLUTION

NFtoBC
Community Power User
Community Power User

Yes, you can do that, however, if you have Optik TV, it will need to hardwire or connect to the T3200M Wi-Fi signal. You could run both Wi-Fi SSID if you wish.
You can turn off the T3200M Wi-Fi SSID in the settings of the router.

 

 

NFtoBC
If you find a post useful, please give the author a "Kudo"

View solution in original post

1 REPLY 1

NFtoBC
Community Power User
Community Power User

Yes, you can do that, however, if you have Optik TV, it will need to hardwire or connect to the T3200M Wi-Fi signal. You could run both Wi-Fi SSID if you wish.
You can turn off the T3200M Wi-Fi SSID in the settings of the router.

 

 

NFtoBC
If you find a post useful, please give the author a "Kudo"