New Telus PureFibre installation Quebec

[PeterParker]

Hi everyone,

I'm new to the Telus fibre family. Today was the day of the installation. The first tech who came was a Bell technician, and luckily I manage to call the Telus tech when the Bell tech was there, because he told me to not use the Nokia ONT (the white squared one), but to use a SFP. So the Bell technician installed the SFP, it is a Nokia G-010S-A, which, if I understand correctly, would allow me to bypass completely the NAH20. But the Telus tech wasn't sure, as he told me it was not possible to have internet wihout the NAH20.

So first question, can I completely bypass the NAH20 knowing that I have a Nokia G-010S-A SFP, or I am stuck using bridge mode on it?

If possible, I would like to use this media converter, TPLINK OMADA MC420L

Would it work using this? I want to use that and connect it to a Unifi cloud gateway max and a wifi 7 pod also. I also want to know if I can use an MTU of 1508 on the UCG max, I know Bell are using baby jumbo frames.

Chris

[PeterParker]

2nd Part, I had post another one because my message exceed 2k characters.

Also, my current plan is 1.5gbps down and 940 up. I connected my pc to the 10gbps port, and my pc has a 2.5gbps port. So when I do a speedtest, my download speed only goes up to 1430mbps, and my upload speed up to 1060. So I was wondering why I don't have full speed when downloading, I thought ISPs normally do overprovisioning on the connection?

Finally, I did try the bridge mode, but when I did it on my Asus RT-AX86U, I had to put the credentials for PPPOE authentication, but not set the VLAN ID to 40. It was working only with the credentials, which was weird. I wanted to revert the bridge mode, but I could'nt go to the NAH20 interface. I managed to do it by using 1 ethernet port on the Wifi Booster.

Thanks a lot for your answers, I would really appreciate some feedbacks!