cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

2.4 GHz network

Mini60
Just Moved In

Need to have a separate 2.4 GHz network to sync some hardware. Cannot find any method of either setting up a separate 2.4 GHz network or forcing current modem to 2.4 GHz mode.

Help

1 ACCEPTED SOLUTION

FuzzyLogic
Community Power User
Community Power User

As mentioned you will need to disable smart steering. Here is an in depth article on working with these settings for the T3200M:

 

Managing Wi-Fi on Actiontec T3200M | TELUS Support

 


Just a long time customer hoping to help.

View solution in original post

3 REPLIES 3

NFtoBC
Community Power User
Community Power User

If you have the T3200M router, you can turn off Smart Steering in settings. On the newer Arcadian Hub, you may be able to turn off the 5 GHz radio temporarily in settings, and turn it on again once you have set up your devices.

 

NFtoBC
If you find a post useful, please give the author a "Kudo"

FuzzyLogic
Community Power User
Community Power User

As mentioned you will need to disable smart steering. Here is an in depth article on working with these settings for the T3200M:

 

Managing Wi-Fi on Actiontec T3200M | TELUS Support

 


Just a long time customer hoping to help.

SHAYVR
Just Moved In

I used 3 bands, 2.4G, 5G low and 5G high, with same SSID, and successfully connected to Ecovacs DEEBOT which can only be matched by 2.4G when they are all enabled.