Forum Discussion

bzborowski's avatar
bzborowski
Neighbour
6 years ago
Solved

Unable to to obtain the advertised wireless speeds....

Hi There,   Our house has lot of devices when you add them all up, AppleTV (x2), laptops (x2), Computer(x1), Apple Watch(x1), eReader(x1), and two cable boxes.  We are currently on the Telus 150 pl...
  • Nighthawk's avatar
    Nighthawk
    6 years ago

    2.4GHz wifi is limited in speed. If you want faster wifi, you need to be using 802.11ac on the 5GHz band specifically. You'll also need to tweak one or two settings as well. Just be aware that 5GHz has much shorter range than 2.4GHz and can be more impacted by environmental factors like walls.

     

    Firstly, do you have two separate networks showing for your T3200? (ie is SmartSteering disabled?) If not, disable SmartSteering in the wireless settings on the T3200M.

     

    1. In the T3200M settings, go to Wireless Setup > SmartSteering
    2. Select Disable and then click Apply.
    3. Click on Basic Settings in the menu on the left. You should now see settings for both the 2.4GHz and 5GHz networks. Configure as needed.
    4. Next, click on Advanced Settings on the left menu
    5. Ensure 5GHz is selected at the top of the page then make sure Compatibility Mode shows 5GHz (A,N,AC) 
    6. Change the Channel Width from 20MHz to either 40 or 80MHz and then hit Apply.
      1. Additionally, you could enable Scheduled Optimization if you want the T3200M to optimize things every 24 hours.

    Once done ensure whatever device you're using is capable of 802.11ac (which most modern ones should be with some exceptions). Connect to the 5GHz network on the T3200M and re-test speeds. The further from any router, the weaker the 5GHz signal will get, especially if it has to travel through walls or floors.