Forum Discussion
Synology NAS
Hi, I'm trying to set up a Synology NAS with a Static IP Address using the Telus Modem ActionTec T3200M. I've tried DHCP Reservation using the MAC address and selecting an IP. I'm not very well v...
Nighthawk
Community Power User
Community Power UserMake sure you update the settings on the Synology as well. If that doesn't work you may have to re-run the Synology Assistant.
I updated the settings and it didn't work so I tried re-running the Synology Assistant and it still can't find the server. I don't think it matters at this point since I have the server up and running with a static IP.
Are you sure you set it with a static IP within the network subnet set on the router? Did you also set the subnet to 255.255.255.0?
Hi Hoot, I reviewed the setup and it's a static IP with the same subnet you noted.
It's not clear whether you still have the DHCP reservation for the NAS. If you assign a static IP on the NAS you need to make sure the DHCP server doesn't give the same IP address to a DHCP client by adjusting the IP range. If you still have ethe DCHP reservation for the NAS you really don't need to set a static IP on the NAS.
