Forum Discussion
Solved
Adding a Wifi Extender to Garage
I have a Wifi 6 (Boost2) connected to my NAH. I also have two older Telus Wifi Boost devices (white squares on a stand). What I would like to do is use one of these Wifi Boosts as a wifi extender (without an ethernet connection) to extend the range of my wifi to my garage. Is this possible? I cannot seem to connect the Wifi Boost devices to the Wifi 6 Boost2 without an ethernet connection.
I have confirmation from Telus tech support that the old Boost (white square on a stand) is incompatible with the Wifi 6 Booster (aka Boost2). Case closed.
8 Replies
I have confirmation from Telus tech support that the old Boost (white square on a stand) is incompatible with the Wifi 6 Booster (aka Boost2). Case closed.
They just need to be setup via ethernet connection first, then you can unplug them and move location... when you power up again with ethernet, it should connect to your network as repeater.
*power up again withOUT ethernet..
- NFtoBC
Community Power User
If I recall, you have to connect by ethernet to complete the setup, but they are wireless from then, but, of course have to be close enough to work. You can set them up through the MyTelus App, or using the web admin using the Admin password on each Boost unit, and the IP address assigned by your router.
I have connected the Booster with ethernet. But I want it to work without ethernet. I understand that the boosters work in pairs- one connected to ethernet and the other acting like a mesh. Conceptually I would like to consider the Boost2 (white cylindrical thing) to be the main booster, and the other as an extender. I believe you are referring to the Telus Connect app. Whenever I set up a booster using the wizard on the app it hangs on the screen saying connecting, even though a blue solid light appears on the booster.
- NFtoBC
I’ve always used the webpage admin tool, rather than the App.
