I activated the Telus Wifi Booster pack a month ago as in one with cable to router in my office and then the second one (no cable) in our living room . All using the Telus MyApp (IPhone version). It of course established a new router wifi name and a new password.
This week I received the third booster (bought with points) went to setup.
Problem #1 is the MyApp does not have a section called "Advanced Add Wifi Booster" setup under setting per their enclosed card in the box.
So I went to the Wifi booster section. big mistake.. it guides you as if Ethernet setup then power on,... I got red light, wait then blue blinking then wait then back to red, down is basement ,,, tried 3 locations,,, same issue , took upstairs and placed in office, four inches from #1 booster,,, same problem.
I then thought may MyApp is outdated, erased and reinstalled,,,, that was a major major mistake, had to resetup including Admin pw from back of number one and both boosters.
Cannot find advice on their website and contact is a joke in trying to get hold of a human
Here I thought it was easy to setup a 3rd booster'
Solved! Go to Solution.
If I recall, to set up the third Boost device should be the same as the second. Both it and number 1 need to be plugged into the router at the same time, so number 1 transfers info to number 3. Your comment does not make it clear if this step was followed.
This thread saved my 3rd Booster connect project. All good, except that the Telus MyWiFi is inoperative when there is more than 1 Booster on the network -- at least for me, and my home network is 100% Telus (T3200M and 3 Telus WifI boosters). Exchange with the developer confirms that this is a known problem -- able to do most of what I need using the browser app on Windows.