cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Port forwarding Arcadyan boost 2.1

Dafyd
Neighbour

Hi, I need to open port 3000 on my access hub but can only access the wifi hub which has no access to fire wall advanced settings or port forwarding. So I looked everywhere for a password to access the access hub but I have none. Only the admin password to access the wifi hub. Thanks in advance.

2 REPLIES 2

Nighthawk
Community Power User
Community Power User

The Boost is merely a wireless access point. It's not the router. If you have the white square network access hub gateway/router, the sticker with the admin password is under the lid on the top. If the screw securing the lid is not in place, you'll just have to carefully pop off the top. You can see the hole where the screw would be at the top center of the back:

NH20A.png

 


If you find a post useful, please give the author a "Kudo" or mark as an accepted solution if it solves your trouble. 🙂

Thanks. I did not no the lid popped off. I removed from the wall to look behind. Everything is perfect. Thanks again.