Forum Discussion
Port Forwarding
I have Telus internet 150 with the T3200M and I have a Deco x60 connected to it for everything from wifi to hardwired connections. My problem is I'm trying to setup port forwarding, I have the port f...
Ok interesting, so before i changed anything the cable that brought internet in was originally plugged into LAN1 then i had a second cable plugged into LAN2 going to the Deco. But because of bridge mode i switch the cables so that Deco was LAN1 and the cable bringing the internet in was LAN2. Should i change the LAN2 (internet in) cable to the WAN port?
Nighthawk
Community Power User
Community Power UserIf you're talking the T3200, yes. The line in must be in WAN. If you've bridged the T3200, then the Deco has to be in LAN1.
ok, so I've changed that so now the internet in is connected to the WAN port, but for port forwarding it says the Deco IP address is out of range and not a valid IP
- Nighthawk
You may have to reboot your Deco units after the switch to the WAN port if they aren't picking up an new IP address automatically. Possibly the T3200 as well.
