- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-10-2020 10:56 AM
Hello, I have the Fibre optics wi-if smart hub and I cannot connect a GE smart plug because it says I don’t have a 2,4ghz. I see lots of fixes for the older version of the modems but not mine? I have the Arcadyan Telus Wi-fi Hub? Any help would be greatly appreciated
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-10-2020 11:29 AM
You should be able to turn Smart Steering off through the web interface. Access it at 192.168.1.254, and the password on the device. This will create 2 SSID, one for each band. You should then be able to add your devices to your network.
If you find a post useful, please give the author a "Kudo"
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-10-2020 11:29 AM
You should be able to turn Smart Steering off through the web interface. Access it at 192.168.1.254, and the password on the device. This will create 2 SSID, one for each band. You should then be able to add your devices to your network.
If you find a post useful, please give the author a "Kudo"
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-10-2020 12:27 PM
Thanks for your help, I tried this and I get to a Telus page asking for user name and password and none of them work where would I find this?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-10-2020 02:23 PM
As long as they haven't been changed, they should be located on a sticker on the side of the Telus Wifi hub.
If you find a post useful, please give the author a "Kudo" or mark as an accepted solution if it solves your trouble. 🙂
