02-26-2023 09:12 PM
02-27-2023 12:40 AM - edited 02-27-2023 12:27 PM
@NewfieRocket Wrote: Data Port 1 is only a 10/100/1000 Port.
Indeed after reading some of the online literature and Specs for this device, it seems as it indeed has 1Gbps ports.
I would contact TELUS support to discuss a hardware u[grade to enable support for your 1.5Gbps service. Cheers...
If you find this post useful, please give the author a "Solution", or mark as "Kudo", if it solves your problem, thank you very much.
03-01-2023 01:04 AM
Ok so after doing some digging here is what I found:
In My situation I was running two routers with public IPs, in typical fashion as described all over this forum. ONT -> Switch -> NH20A and XR1000 Routers. Everything was fine until I upgraded to 1.5GBs. At this point this no longer worked as it was bottle necked at the LAN port 1 of the ONT. I thought I might get new hardware to support those speeds but was assured by Telus I had the newest gear. After many phone calls to Telus technical support and absolutely Zero help from them(they literally had no idea) and digging in this Forum I realized that the only solution was to have the fibre come directly into the NH20 and Bridge the 10GBs port and hook my XR1000 into it.
For anyone not getting max speeds on anything over 1GBs this is a very viable solution. Running speeds tests on two different PCs at the same time I was averaging about 1.7 GB/s which I am very pleased with. My house hold normal traffic and server is free to do as they please and it will not in any way interfere or cause buffer bloat on my gaming network.
03-02-2023 01:25 PM