Forum Discussion
Solved
How to set Second T1200M Router to create second WiFi channel network
Greetings, I wish to feed a second T1200M from an Ethernet port fed by the primary T1200M modem to create a second WiFi network on a separate WiFi channel. The primary T1200M is in the basement a...
The solution I finally found was to purchase an inexpensive TP-Link TL-WR841N router which is specifically designed to support the provision of an additional WiFi access point when linked to an Ethernet RJ45 LAN interface. The Actiontec does not appear to support this function without a firmware work around hack.
The solution I finally found was to purchase an inexpensive TP-Link TL-WR841N router which is specifically designed to support the provision of an additional WiFi access point when linked to an Ethernet RJ45 LAN interface. The Actiontec does not appear to support this function without a firmware work around hack.
Ya no the old 1200 is still a modem/router, it doesn't do 5g anyways so your speed would b limited to 2.4g 50/60M. You need either just the router that u purchased or their V1 boosters that can do 5 g. You would still want both of the V1's to be hardwired for optimal speed.
