Forum Discussion

DustMaKeR's avatar
DustMaKeR
Friendly Neighbour
10 months ago

Telus Pure Fibre Install - SFP WAN PPoE Login

Hi everyone,    I am in Ontario where Telus has started providing PureFibre through Bell's network.    In my current set-up I do not use Bell's Home Hub, but rather have my own intricate network ...
marting's avatar
marting
Neighbour
10 months ago

I ran into the same problem, scratching my head for a couple a days.

 

In my case Bell didn't leave a SFP module, they left a Nokia ONT. Then TELUS installed their NAH (Network Access Hub).

 

The thing is, I wanted to use my own router, so I put the NAH into bridge mode for LAN1 only.

 

To answer your question, you can find the PPPoE credentials in the NAH interface. Go to 192.168.1.254 with the login "admin" and the password is written on the NAH under the cover.

 

Then under Network > WAN you should see the PPPoE connection settings and everything should be there. For the password, just change the input type from "password" to "text" using F12 for the Dev Tools

DustMaKeR's avatar
DustMaKeR
Friendly Neighbour
10 months ago

Thank you marting this is very helpful. I am definitively going to try it and post my results. I would really would like to avoid using the TELUS NAH if possible and just use my Modem directly, but if not possible, I guess I will have to do the Bridge mode method.

Related Content