Forum Discussion
Solved
T3200M SSID isolation - can't change setting
I have been tearing my hair out over this... does anyone have any suggestions? T3200M has port 1 bridging to my own router (connected to VPN), so have to use Actiontec gateway to access my home s...
I'm hesitant to do that.. I have had experiences where the returning to a "default" setting created chaos
I took the VPN off my Port 1 router (and started using a Windows app), so all is good.
Thank you for your helpfulness,xray
Yes...but that is greyed out!
Are you connected to the T3200M on that SSID when you view it? Try connecting with Ethernet to see if it makes any difference. Perhaps you can't change it while you are usingi it. It's a long shot but I'm running out of suggestions.
No problem mtn. Glad to hear you found a workaround.
So taking the T3200M out of bridge mode put the SSID Isolation setting for the main WiFi to disable?
If you need to run a VPN on your other router you could have put that router inside the T3200M network. My home network is running on an Asus router connected to the T3200M. I keep the Optik boxes on the T3200M. That way traffic between my computers, network storage and media server doesn't compete with the Optik traffic.
I'm hesitant to do that.. I have had experiences where the returning to a "default" setting created chaos
I took the VPN off my Port 1 router (and started using a Windows app), so all is good.
Thank you for your helpfulness,xray
Have you tried a Restore Defaults on the Wireless Settings?
It's under Advanced Setup -> Modem Utilities
- No dice, still greyed out. I'm approaching the point where I'll follow nftobc's advice: give up and bridge port 1. Just have to figure out impact to my VPN first.Thanks for taking an interest!mtn
