Forum Discussion

onovtec's avatar
onovtec
Friendly Neighbour
2 years ago
Solved

T3200 and boost v1's upgrade to wifi 6 router

Hi, currently I have the t3200 and 4 boost v1's. 3 are hard wired, and 1 is on wifi.  Awhile ago I upgraded to the fibre 1 GB service, but they never provided me with any wifi 6 equipment.  Recently ...
  • cvr24's avatar
    2 years ago

    You only get one of the Boost 2.0 units, if you want more then you need to pay the $10 a month for WiFi plus which gives you as many as you need.  The phone rep knows this and that's probably why they aren't going to give you just one, combined with likely hardware shortages.  You'll get worse performance and be unhappy.  But, they cannot be mixed with the old 1.0 Boost units, and they all must be hard wired.  No wireless meshing with 2.0.

    I have a similar setup as you, and have decided I'm going to stick with the 1.0 Boosts. Not worth the hassle to switch everything out.  I have all the TVs and PCs hardwired and 100 Mbps is more than plenty for a phone or tablet.  I have been using the 1.0 Boosts for five years and I'm still impressed with their performance and I never have to mess with them.