Forum Discussion
Solved
New Telus PureFibre installation Quebec
Hi everyone, I'm new to the Telus fibre family. Today was the day of the installation. The first tech who came was a Bell technician, and luckily I manage to call the Telus tech when the Bell tec...
Hey Peter, I'm currently using the Ontario service of telus pure fibre, and have bypassed the NHA20 by using a fiber media converter. WARNING, this will only give you ipv4 as of now and NO IPV6. Here is the link to the one I used. You are going have to set all the PPPOE and VLAN settings as follows,
VLAN ID: 40
Priority: 0
802.1q tag: yes
Be sure to use the SFP module provided to you by the tech
I'm considering buying this same router to use with Telus Fibre service. I'm curious: what settings from MrFiber are you referring to, and where did you set them?
Thanks,
These are the settings to be able to connect to the Bell network. Bell is using a PPPOE connection, and on the Asus router, you can set them on the WAN section, just enable 802.1q, put vlanid 40, put your PPPOE credentials (you have to ask Telus to have them or the technician).
