Forum Discussion
Solved
Problem connecting devices to Telus modem
I have a Honeywell thermostat which connects to the internet via a redlink internet gateway. I have issues connecting the redlink to the internet (via cable) and I was told it is a common issue with t...
FIXED!!! No need to replace modem.
- Open browser, type in 192.168.1.254 to open admin portal
- type "admin"; password admin password from modem
- "Change the device login password" - skip
- Dashboard - left menu - click Network
- Network dashboard - top menu - hover over LAN - click on BRIDGE
- BRIDGE page - check ENABLE BRIDGE (opens LAN PORT dropdown options - click LAN 1 (refers to port options on back of modem)
- click SAVE SETTINGS ("applying changes ...")
- Logout
- Unplug power from Redlink Gateway device, wait 10 seconds, plug back in.
- Ethernet light should turn GREEN now
- Test - open TCC app, adjust thermostat, see if thermostat registers change.
- THANKS ANNA!!!
I have the exact same issue...Telus tells me the problem is with Honeywell, the supplier of the device and Honeywell says its related to Telus. Anyone?
I have the same issue. Both of what Telus and Honeywell is correct. I'm sure it's more on the Telus side. I think their router is picking up the communication to Honeywell as a hacking attempt. The solid yellow light means it's on the network but, it's unable to get to the Honeywell server.
Do you know what the firmware version of the WI-Fi 6 units are? and is there any switch in your environment?
