Forum Discussion
Solved
Gigabit internet - only limited to 100mbps connection from modem to gigabit router
Hi all,
I've recently upgraded to gigabit internet. I bought a gigabit router and connected my Wifi hub to it. However, I am only getting a 100mbps connection over WAN. I have confirmed that I have a gigabit LAN connection from my PC to the router, and that the cables used are Cat 5e. The router settings page also shows only a 100mbps speed over WAN.
What is going on??
Fixed it guys. I confirmed my suspicions and hooked up Cat6 from my 3rd party router to the Wifi hub and i have close to gigabit speeds. I'm still confused as to why my Cat5e cable did not work, but that's a trivial issue now. Thanks everyone!
8 Replies
Replies have been turned off for this discussion
Fixed it guys. I confirmed my suspicions and hooked up Cat6 from my 3rd party router to the Wifi hub and i have close to gigabit speeds. I'm still confused as to why my Cat5e cable did not work, but that's a trivial issue now. Thanks everyone!
Replace your Ethernet cables. A bad cable will drop a 1gbps connection down to 100mbps. If it was some number other than 10 or 100 I’d think it was something else but I’m pretty sure using different cables will work. I’ve had lots of cables fail in the same way.
Are you running your own router in addtion to the Telus router or did you running it instead of the Telus router? You need to clarify your network layout.
Reading the post title again I see you have replaced the Telus router with your own.
Were you getting a Gigabit WAN connection using the Telus router?
Have you tried switching the Ethernet cable with the one you are using between the PC and the router?
- Hi x-ray,
My current setup is ONT > WIFI Hub > router > PC. I tried ONT > Wifi hub > PC but on my pc Ethernet settings it only shows 100mbps.
Also, I have another silly question. So I'm able to connect to the wifi hub directly with a wifi device. So is the wifi hub a router, modem, or both?
