User Profile
howard2010
Neighbour
Joined 5 years ago
User Widgets
Contributions
Re: Purchase a second WAN IP for a device using T3200M Port1 in Bridge Mode?
Hi Nighthawk: It's strange. I have a T3200M with 3 Optik set top boxes (PVR + 2 regular set top box) directly attached and on their own subnet. Also had a Bitdefender Box 2 (firewall / router) attached to port 1 which was in bridge mode. TELUS claimed too many IP's being used. Bitdefender tech support advised the Bitdefender Box 2 only acquires 1 IP. That should only be 2 - dynamic- IP's: one for the T3200M and one for the Bitdefender Box or am I missing something? Internet and Optik TV boxes all went offline and the Nokia G-240G-A Optical Network Terminal (ONT) 'FAIL' led was on. Right now I have bridge mode disabled ant the Bitdefender Box in a DMZ (only device there). Internet and Optik TV boxes all went offline briefly this morning and 'FAIL' led on on ONT; after ok for several days. Sent from Samsung tablet Get Outlook for Android Sent from Samsung tablet Get Outlook for Android Sent from Samsung tablet Get Outlook for Android3.3KViews0likes1CommentRe: Bitdefender Box 2 - Can't use T3200M Bridge Mode?
Follow up: July 19: With Bitdefender box in a DMZ on T3200M after working for a couple days, internet / Optic TV failed this morning and 'FAIL' light was on Nokia Optical Network Terminal (ONT). Only turning off and removing power from the Nokia Optical Network Terminal (ONT) restored connectivity. Note as well: we had a TELUS tech here on July 16 and he could find no problems.2.3KViews0likes0CommentsBitdefender Box 2 - Can't use T3200M Bridge Mode?
I have had for a few years a Bitdefender Box 2 (basically a router / firewall to protect my IoT devices) attached to my TELUS T3200M without issues. To be safe ( I assumed); I have by Optik TV boxes attached directly to the LAN jacks on the T3200M (and using their own network). I put the T3200M into 'bridge mode' and attached the Bitdefender box to that 'bridge' port; no problems since purchasing the device a few years ago with this configuration. This includes switch from TELUS copper to fibre optic last year. Early on July 15, my internet went down for no apparent reason. I contacted TELUS and was told the device (was Bitdefender Box 2) using bridge mode was the problem as it was acquiring too many IP addresses. Strange how after years this is suddenly a problem. Does anyone know more about 'bridge mode'? I assumed only one IP would be used by the T3200M and everything else attached would be via / behind that IP. Additionally, over the last few days since the initial problem; when the Bitdefender Box 2 was using 'bridge mode' on the T3200M it occasionally appeared to cause the 'FAIL' light on the TELUS provided Nokia Optical Network Terminal (ONT) to come on and all of my devices (Optik TV, internet) to fail. Removing the Bitdefender Box 2 resolved the issue. As a workaround, I have turned off Bridge mode and the Bitdefender is now in a DMZ (outside the T3200M firewall) but, that has created some minor issues. Regarding DMZ mode, what setting should be used with the 'DMZ Timer' so that the device (Bitdefender Box 2) will always be in the DMZ?2.4KViews0likes1Comment