Forum Discussion
Solved
Technicolor NH20T
I switched from Shaw to Telus PureFibre a little while back and had a Technicolor NH20T installed. As I already had a TP-Link Deco XE75 mesh system set up, it was easier to just put the NH20T in brid...
- I didn't think you will be able to reach the NH20T from your LAN if it's in bridge mode. I'm not familiar with that device but if bridge mode works on specific ports then you should try connecting to the other ports instead.
Never mind, just figured out that the NH20T comes apart in TWO sections.
If you pull the sides of the unit, one part is exposed that has zero information on login, but if I open from the BOTTOM, then a cover comes off and voila, login info! Haven't tried yet, but assume it is correct.
Figured this out from here - https://www.reddit.com/r/telus/comments/u5v8rv/comment/ilw4z9j/
ichi730
TELUS Team Member
TELUS Team MemberCan you try this thread? https://forum.telus.com/t5/Internet-Home-Phone/New-FibreModem-NH20A-Cannot-find-default-admin-password/m-p/122104
Credits goes to NFtoBC
Ah - I know why the search didn't find it - that is the NH20A not the NH20T
Mine looks slightly different and has no markings with any useful info on it - unless it is on the back of the unit, I didn't try unscrewing it from the wall.
It doesn't show any default IP or anything.
I have tried connecting to and pinging 192.168.1.254, but nothing.
- I didn't think you will be able to reach the NH20T from your LAN if it's in bridge mode. I'm not familiar with that device but if bridge mode works on specific ports then you should try connecting to the other ports instead.
