Forum Discussion

homac's avatar
homac
Neighbour
3 years ago
Solved

Replacing Telus/Actiontec T3200 Modem

I am looking to replace my Telus/Actiontec T3200 with a TP-Link AX1800.   I have fibre internet only and no Telus Optik TV.   Is it as simply as removing the T3200 and using the same patch cable fr...
  • xray's avatar
    xray
    3 years ago
    Just do a straight swap as you describe. Should work.
Anonymous's avatar
Anonymous
3 years ago

use the default config of the tp link router, it should configure from the tp link  AX 1800 router ,DHCP automatically sent from the modem  to the tp link ax1800 router.

connect the TP-Link AX1800 using the WAN port on one end of the ethernet cable and the other end of the cable  to the LAN ports on the T3200M modem or the lan ports on the network access hub (NAH) modem.

Nighthawk's avatar
Nighthawk
Icon for Community Power User rankCommunity Power User
3 years ago

Since you're parotting replies, there are multiple corrections for yours. There is no modem or NAH in this configuration. There is no "DHCP sent from the modem". That's not how DHCP works to begin with. The T3200M, which is also not a modem for this setup, is being removed from the configuration.

Related Content