Forum Discussion
Solved
Pure fibre self pre install-move off copper internet / RG6 TV
Does Telus have a email contact where i can send existing cabling and proposed new setup to determine what options and equipment they could drop off and what i may have have to provide? They are offe...
You will need to place an appropriate Access Point in the garage space, and a Wi-Fi set-top Box at each TV. The Access Point May be connected by Ethernet or coax (using MOCA adapters) to the Router in the home.
Fiber > ONT > Router (> AP) > TV
thanks, the TV count would be per telus max, six i think. The question is what type of telus equipment/media convertor would go in garage if RG6 reused? Would this equipment be run from a port off the ONT via fibre or via Cat6 rj45 copper cable? Next question if RG6 abandoned what equipment goes on each TV to be part of the WiFi network?
NFtoBC
Community Power User
Community Power UserYou will need to place an appropriate Access Point in the garage space, and a Wi-Fi set-top Box at each TV. The Access Point May be connected by Ethernet or coax (using MOCA adapters) to the Router in the home.
Fiber > ONT > Router (> AP) > TV
