Forum Discussion
Moca Adapter Coax Wiring
Hello, I recently purchased a pair of Moca Adapters. (Actiontec ECB6200) I made a connection to my 3200M, that line then connects to a splitter with 4 lines. 2 of the lines, were installe...
Do a basic continuity check on each coax run. Make sure nothing is connected to either end of the coax being tested. Short out one end of the coax by bridging the centre wire with the shielding (threaded nut). Go to the other end and do a continuity check with a multi-meter between the centre wire and the shielding (threaded nut).
Be sure to remove the short when you are done.
