Forum Discussion
Solved
How to connect my own router to the T3200M?
So, I thought this would be straightforward. Nope. I used the port bridging function on the T3200M, then turned off the WiFi. Internet works great with my new Asia router, but the PVR and the 2 wireless TV boxes stop working. Rebooted, reset, all devices, not just the T3200M. What am I doing wrong?!?
When Optik tv services and Wi-Fi boxes are involved the T3200M handling it with the Wi-Fi radio on is the best way.
You don’t have to enable bridge mode in the settings as well. Just use port 1.
3 Replies
Replies have been turned off for this discussion
Let the T3200M handle all the Optik TV services, use your secondary router for everything else.
- That’s what I was trying to do. Turns out, you can’t go into wireless settings, and disable the radios. That messes everything up. Leave them on, and everything works great. Stupid firmware. Thanks for trying to help though.
When Optik tv services and Wi-Fi boxes are involved the T3200M handling it with the Wi-Fi radio on is the best way.
You don’t have to enable bridge mode in the settings as well. Just use port 1.
