Forum Discussion
Solved
How do you select 5ghz only on the wifi 6 routers
So is the only way to change any settings on the wifi hubs routers thru the app only?? Since you can no longer access the wifi setting on a pc?? So basically we can’t set anything or do anything with ...
Sure there's a way to log in to the web interface of the Wifi 6 units. You just need to find out what IP the unit has assigned to it. Most cases if you open the web interface for the main Telus gateway / router (192.168.1.254) it should show the device and it's IP.
For example, I have the T3200 gateway from Telus. When I open 192.168.1.254 in a browser, I can see the list of connected devices including the Wifi 6 or Boost 2.0 access point. Keep in mind, unless you set up a static IP for the Boost, this IP address can change.
t3200-1.png
If I then put that IP address into a browser, I get the login page for the Boost / Wifi 6 AP:
t3200-2.png
The username and password for it, if it's still set to the default ones, are on a sticker under the bottom cap on the Wifi 6 / Boost unit itself.
Once logged in, click in Wi-Fi on the left menu:
t3200-3.png
By default the Boost / Wifi 6 AP will have a combined 2.4 and 5GHz network. If you wanted to disable the 2.4GHz network, click on WLAN 2.4 GHz at the top.
t3200-4.png
At this point you can simply select No for Enable Radio and hit Save to disable 2.4GHz.
t3200-5.png
If you wanted a separate 2.4GHz network that is just for smart devices, I have those screenshots here: https://forum.telus.com/t5/Internet-Home-Phone/I-was-just-upgraded-to-wifi6-equipment/m-p/148388#M36038. The smart device network does have separate SSIDs for the 2.4 and 5GHz networks. The only downside is that there is a password that cannot be changed.
TELUS_Support
Official Support Team
Official Support TeamHi cybuster - Not sure what you mean, you can always log in to your modem and make changes. For the ease of use we built in the SSID/password settings to be changed through the app but you can always log into the modem.
- Eric
sry i should reword that there's no way to control the wifi settings of the wifi 6 hubs other than thru the telus app where all you can do is change password? coz if u access the admin console thru the gateway there's no options to change anything regarding the boosters/hubs like how do i change the wifi broadcast channel etc etc?
- Nighthawk
Community Power User
Sure there's a way to log in to the web interface of the Wifi 6 units. You just need to find out what IP the unit has assigned to it. Most cases if you open the web interface for the main Telus gateway / router (192.168.1.254) it should show the device and it's IP.
For example, I have the T3200 gateway from Telus. When I open 192.168.1.254 in a browser, I can see the list of connected devices including the Wifi 6 or Boost 2.0 access point. Keep in mind, unless you set up a static IP for the Boost, this IP address can change.
t3200-1.png
If I then put that IP address into a browser, I get the login page for the Boost / Wifi 6 AP:
t3200-2.png
The username and password for it, if it's still set to the default ones, are on a sticker under the bottom cap on the Wifi 6 / Boost unit itself.
Once logged in, click in Wi-Fi on the left menu:
t3200-3.png
By default the Boost / Wifi 6 AP will have a combined 2.4 and 5GHz network. If you wanted to disable the 2.4GHz network, click on WLAN 2.4 GHz at the top.
t3200-4.png
At this point you can simply select No for Enable Radio and hit Save to disable 2.4GHz.
t3200-5.png
If you wanted a separate 2.4GHz network that is just for smart devices, I have those screenshots here: https://forum.telus.com/t5/Internet-Home-Phone/I-was-just-upgraded-to-wifi6-equipment/m-p/148388#M36038. The smart device network does have separate SSIDs for the 2.4 and 5GHz networks. The only downside is that there is a password that cannot be changed.
