Arcadyan NH20A Class A Subnet Mask on LAN Port

Bartsch_Labs Wrote: Yes, I have my own DHCP server.  When you say "the device", I take it you're not referring to the NH20A, because the NH20A doesn't seem to have a bridge mode.  

Ok, lets try this to see how it works for you... Indeed I am referring to the TELUS device as the device.

Now here is where the complication may come into the picture. TELUS has 2 very similar devices that they refer to as NH20A. First one is a Technicolor FXA500 and then the other is the Arcadyan NH20A

You need to make sure which one you have.

Instructions for the Technicolor FXA500.

To get to the setting that will allow you to change the modem into bridged mode go to the following settings.

Settings - Broadband Icon - Local Port Mode.

And the Arcadyan NH20A

Network - LAN -Bridge

I would set the bridge to use the 10Gbps port myself as that will support everything from 1Gbps to 10Gbps out to your 3rd party router where you can set all your network settings.

Hope this helps... Cheers...

If you find this post useful, please give the author a "Solution", or mark as "Kudo", if it solves your problem, thank you very much.