Forum Discussion
IPV6 Support
Hi There,
Trying to get a clear answer on this as calling tech support did not get me anywhere.
Does Telus support IPv6 connectivity? My router (t3200) is set up as per the instructions others have used in this forum but I am constantly stuck in a "connecting" state but never connect on the WAN port.
Is IPv6 rolled out across the network or is this something still in progress?
5 Replies
Replies have been turned off for this discussion
Fuzzz Wrote: Does Telus support IPv6 connectivity?
I have had IPv6 enabled for a bit now. However, I must say that it is being done on a 3rd party router other than a T3200M.
However, I'll attach the setting that I have recorded for a T3200M that I use to use to see if that may help you. Cheers
Let's start by checking your settings. Go to Advanced Setup -> IPv6 WAN Settings, and verify the following settings:
IPv6: enable
WAN IPv6 IP Protocol: DHCPv6
Request PD Only: Yes
IPv6 DNS Type: Default Servers
Also check your IPv6 LAN Settings:
LAN Connection Type: stateless
ULA Support: disable
Subnet Number: 0
Delegated to LAN: No
Make sure you reboot the router, as most of the setting will not work without it.
If you find this post useful, please give the author a "Solution", or mark as "Kudo", if it solves your problem, thank you very much.
I followed the instructions (sort of, as much as they apply) for Asus AX88U and IPv6 now works for me. For AX88U - enable "connection type - native" and go with all the other settings; which should include the LAN connection type as "stateless"; just check.
I have ipv6 on a T3200M on fibre. My daughter has a T3200M on cooper and does not have ipv6.
Thanks for this. Appreciate the input.
Thanks for this, those are the same settings I have setup on my end. Seems like IPv6 might not be enabled for my neighbourhood.
