User Profile
kevhawk
Organizer
Joined 12 years ago
User Widgets
Contributions
Re: Telus Wi-Fi Hub re-enabling wifi despite being in full bridge mode?! DHCP chaos.
SFP and SFP+ are not compatible hence why I mentioned the need for a media convertor. You could also use a Ubiquiti Edge Router ER-X-SFP but it's got some issues with the Nokia SFP Telus uses and is not unifi. With the media converter your simply converting the fiber SFP which is max 1Gbps to single 1Gbps Ethernet port you can just plug into your current hardware.22KViews0likes2CommentsRe: Telus Wi-Fi Hub re-enabling wifi despite being in full bridge mode?! DHCP chaos.
It may have simply been pushed a software update that causes it to reset it's settings. You may have better luck just eliminating the Telus hub and taking the SFP (non +) module out and plugging it into a media converter such as a TP-Link MC220L then just plug that into your router. Optik TV with Ubiquiti is really a non-issue it's pretty easy to setup if you know how to modify the config.gateway.json on the cloud key I run it all with no issues.22KViews0likes5CommentsRe: Purpose of the ONT
You can pull the SFP out and put it into a media converter or an SFP (non +) capable switch. Not all devices support these SFP ONTs though and some don't have decent cooling for them and tend to cause the SFP module to overheat and restart. If you have an ONT you can remove the T3200M completely and connect directly you just need to make sure your router supports IGMP Proxy with quickleave off. Telus isn't doing anything special with all this and that's a good thing it's really easy to use your own stuff not that'd they support it.11KViews1like2Comments