Forum Discussion
Solved
What does the Network Access Hub do?
I have a Pure Fibre 1.5G plan. The technician installed a Nokia ONT (G-240-G), the NAH (FXA5000), and the Wifi 6 Hub (Router). The topology looks like this: Fibre drop -> Nokia ONT -> NAH -> Rou...
The FXA5000 is the actual router in your current setup. The Telus supplied Wifi 6 device is only a wireless access point and is not a router. It's unusual to see the Nokia ONT in use for connections over 1gbps. The FXA5000 has it's own fibre terminal built in and usually has the fibre directly connected to it for faster connections. In those setups, it's possible to put a 2.5gbps switch on the 10gbps port. The rest of the ports on the FXA5000 are gigabit only.
The Nokia ONT itself only has gigabit ethernet ports on it according to the device spec sheet. While the GPON / fibre port is capable at receiving a theoretical max of 2.488gbps but the LAN ports are still limited to gigabit each. Only the first ethernet port is ever activated on the ONT.
Hi Nighthawk, is it possible to plug from the FXA5000, into a 2.5gb switch, then into a TP Link Deco mesh system?
Nighthawk
Community Power User
Community Power UserAs I mentioned earlier in this discussion, the FXA5000 does have a single 10gbps ethernet port on it, so yes it should be possible to connect a 2.5gbps switch.
