I have been tearing my hair out over this... does anyone have any suggestions?
T3200M has port 1 bridging to my own router (connected to VPN), so have to use Actiontec gateway to access my home server.
Cannot access it on WiFi. Troubleshooted to SSID isolation setting. Using guest SSID I can set this to DISABLE, and then I have access to my server.
Using main SSID, the option is greyed out, and permanently set to ENABLE.
Tried to to disable GUEST SSID thinking that would make MAIN SSID selection accessible. No change.
Am I missing something? Is there a setting elsewhere that's preventing me from changing SSID Isolation? Or am I completely off base with this?
Perversely, I am operating my home network on GUEST SSID, and leaving the main SSID for guests. That can't be what Telus/Actiontec intended!
Thank you for reading this, any help appreciated.
Solved! Go to Solution.
A couple of things to try:
No problem mtn. Glad to hear you found a workaround.
So taking the T3200M out of bridge mode put the SSID Isolation setting for the main WiFi to disable?
If you need to run a VPN on your other router you could have put that router inside the T3200M network. My home network is running on an Asus router connected to the T3200M. I keep the Optik boxes on the T3200M. That way traffic between my computers, network storage and media server doesn't compete with the Optik traffic.
I checked my T3200M settings and noticed that for the default SSID the radio button associated with the disabling isolation has a "dot" and cannot be changed. I've confirmed that the default SSID is not isolated by using a network device discovery app and ping tests. I'm not surprised that TELUS does not let people change the setting for the default SSID as this would break OPTIK TV and create a support headache.
What makes you think the source of your problem is SSID isolation not a routing problem. Traceroute may be helpful.