Connect App - Not connected to Home Network

[FrustratedTelu1]

The Connect App no longer works.  It says, "You need to be on your home Wi-Fi and enter your admin password to proceed.  Please ensure you're connected to your Wi-Fi and reopen the app to try again"   Well......

I have rebooted my ONT

Factory Rest my Wifi Hub

Deleted and Factory Reset my 2 Boosters

Deleted the Connect App and reinstalled on both Android Phone and Ipad

Connected to the factory Wifi

Nothing.....same message.  I am unable to add boosters, change their name, change the SSID name or password or control anything else on the network.

I know I can connect directly to the HUB with the GUI to change the SSID and password but there is no method of changing the booster names.  You used to be able to enter the IP address for the booster and enter the Booster GUI but not it just redirects to the Modem GUI.

I've searched the net and have found instances of this problem as far back as 2021!!  Come on Telus, get it together!

I am open to any suggestions!!

[yagneshjp]

The version of this app on Google store and Apple store is still 2nd Dec ver 5.28.0

Can't see the wi fi plus boosters yet.

The issue still remains as it is for me.

😵‍💫

[Serge-E]

Google Play Store says the latest version available dates from December 2nd, 2024.  I'm writing this post on Dec 22nd, 2024.  I first installed the app on Dec 18th, 2024.

Just for fun, I did uninstall and reinstall the app.  No difference.  It still does not see my network.  It shows a modem, but no Boost units.  In other words, the app remains useless and none of the management features can be done.  The web interface does work.  However, it doesn't allow the many features promised by the app.

The network itself seems to work fine.  I will need to call to get an extra Boost Mini6E for wall to wall coverage.  I have WiFi Plus.  The tech only had two units with him.  But haven't heard back from him since the install.

[wifi2]

I have the same issue. For now, I just use the web interface to update Wi-Fi booster settings.

The password should be at the bottom (covered by the cover).

[eper]

I have the same issue.

I  spent 2.5 hours today waiting in-line and communication I saw boosters one time.

After some time I decided to check again, and NO-BOOSTERS again.
It would be good to have some alternatives to buggy Telus Connect like connecting to 192.168.1.254

I need to add new boosters and cannot do it now.

[TELUS_Support]

Can you check to see if you're using the latest version of the Connect app? If not, can you update it and try again?

[eper]

Yes, Telus Connect was reinstalled yesterday on Android phone.
Today I downloaded and installed it on iPhone, but it is the same - No Boosters.

[TELUS_Support]

I sent you a private message to collect some info to see if we can get the ball moving for you. Please keep an eye out for it 🙂

[yagneshjp]

Sorry. I don't see any private message you might have sent today.

It seems Telus has no solution for this issue that so many subscribers are facing. Such a shame!

Tx.

[eper]

I have already talked today again with Telus Support, they raised a ticket and will reply in a couple of days.

BTW, after restarting the Router/Modem the Connect app shows boosters for several hours, then Connect returns to its "normal" behavior - No Boosters listed.

[Serge-E]

You should be able to add new miniBoosters by connecting, one by one, to the main (tall) using the supplied ethernet cable.  Wait until the miniBooster's LED goes green. Then you should be able to move it to the desired location.  It should connect through WiFi (if it is in range of the main Booster) - LED being solid green for a good connection.

Renaming the SSID and changing passwords for main and guest WiFi networks can be done through web interface of the main booster, not the .254 which is the gateway. That one allows changing the IP scheme and other parameters.  The web interface of the .254 does show the IP address of the main Booster (taller unit) as well as the miniBoosters.  Password to be used is on the label of the respective device, unless you changed them through the web interface.

[yagneshjp]

Thank you for the message. Where to find the web interface you are suggesting. Can you drop the link here.

[Serge-E]

The default for the NOH (modem on wall) is: 192.168.1.254

The login is: admin

The password is on the label found on the "modem" (unit fixed to the wall).  The label shows the default SSID, its password and the admin password.  You need to use that last one to login into the unit's web interface.

[yagneshjp]

Hi I am so confused now.

Last message you said not to use the .254 which is the gateway! . Now you are suggesting to use .254!

I have the wifi 6 network access hub on the wall and main wifi 6 booster and mini booster.

See your message below:

Renaming the SSID and changing passwords for main and guest WiFi networks can be done through web interface of the main booster, not the .254 which is the gateway. That one allows changing the IP scheme and other parameters. The web interface of the .254 does show the IP address of the main Booster (taller unit) as well as the miniBoosters. Password to be used is on the label of the respective device, unless you changed them through the web interface.

[Serge-E]

Sorry about the confusion.

You first have to go to the .254 to find the IP address of your main Booster (tall cylinder).  This IP address can be different from one network to another.  It will have the same first three numbers : 192.168.1, but the last will be unique to your unit on your network.

Once you have that IP address, you can log into your main Booster unit using its IP address and its admin password.  The later is on the units label.

[yagneshjp]

Thank you for more details.

[Brar48]

Same issue. Got new boost 6e. I still see the old one on app. Obviously factory reset everything, etc. Contacted Telus they were useless so far.