Forum Discussion
Solved
SSID Isolation for Guest Network (T3200M) - Chromecast
Hello, So I have a T3200M where I have a main wifi network running in smart mode so it automatically manages the 2.4/5ghz network for me with the same SSID name, which is great for my office wher...
Won't affect the SSID isolation on the T3200 because the firmware is as it is.
It would however give you the possible option of having a physically separate router without needing to mess with settings on the T3200. If you have an ONT (the box that converts fibre to ethernet) you can essentially attach a gigabit switch to it. Have one ethernet cable from the switch connected to the WAN port on the T3200 and hook up a separate router's WAN or internet port directly to another port on the gigabit switch. Each router will have their own separate external IP address in that configuration. They will also be 100% separate and for the second router for guests, you can configure it however you want without any worry that they can access anything on the T3200 network. Just note if your office has Optik TV, the set top boxes will have to still be connected to the T3200.
This is essentially how I would configure my network in your situation. Gigabit switches, especially a basic 5 port one, are typically very cheap to buy. $20 or less if on sale. I have a number of gigabit switches in my network currently. Mostly 8 port but includes this 5 port gigabit switch which I have had no issues with so far.
🙂
Just wondering what my alternatives are if using a guest network with SSID Isolatoin disabled is a bad idea:
Should I buy a cheap router and set it up as a local hotspot for the TV where people can connect and cast?
- this would leave the presenter without internet access which isn't ideal, since a visitor may need to pull up a website, presentation, email, etc...
Can I configure a separate router as above and hook it up to the Telus router for internet access, but not expose my main network?
- not sure how to isolate it from the main network, which would leave me with the same issue as running a guest network with SSID Isolation disabled.
- Nighthawk
Community Power User
Are you on fibre or are you on DSL?
I'm on fibre. Does that affect the way SSID Isolation works on the modem or is there another option available to me to achieve what I'm looking for?
- Nighthawk
Won't affect the SSID isolation on the T3200 because the firmware is as it is.
It would however give you the possible option of having a physically separate router without needing to mess with settings on the T3200. If you have an ONT (the box that converts fibre to ethernet) you can essentially attach a gigabit switch to it. Have one ethernet cable from the switch connected to the WAN port on the T3200 and hook up a separate router's WAN or internet port directly to another port on the gigabit switch. Each router will have their own separate external IP address in that configuration. They will also be 100% separate and for the second router for guests, you can configure it however you want without any worry that they can access anything on the T3200 network. Just note if your office has Optik TV, the set top boxes will have to still be connected to the T3200.
This is essentially how I would configure my network in your situation. Gigabit switches, especially a basic 5 port one, are typically very cheap to buy. $20 or less if on sale. I have a number of gigabit switches in my network currently. Mostly 8 port but includes this 5 port gigabit switch which I have had no issues with so far.
🙂
