Forum Discussion
Solved
Full Bridge NAH To A Router - Will Ethernet ports on the NAH stop working?
Just title, I would rather avoid moving a couple cables if I can help it and just leave them in the NAH after full-bridge
All Ehernet ports still work after changing it to full bridge.
All Ehernet ports still work after changing it to full bridge.
Is there a negative to leaving them in or a positive to switching them? It's mainly some IPTV cables and stuff I'm thinking of
- I assume you have the Nokia ONT as well and NAH sits between ONT and router. In this case, there is no point of keeping NAH. I have my own router connected directly to ONT and works just fine.
I have the alcatel ont, I have to keep the NAH for at least a couple of things because my AXE75 won't have enough room for everything.
I take it I can just take the wan port from the alcatel and stick it in the wan port of my AXE75 and do full bridge mode? Or do I have to use port 1 on the NAH?
- If you'd like to use your AXE75 as router, the NAH can be bridged to give you more ports. Just connect the port 1 to one of AXE75's Lan ports, then you can connect other devices to the rest of 4 ports.
