Forum Discussion
rocketboy2000
6 years agoFriendly Neighbour
Transmission firewall configuration on T3200M
Hey there! my internal router bit it and so i've connected everything directly to my Telus T3200M. most things seem to be working ok... how do i set up the firewall for transmission torrent clien...
- 6 years ago
sorry, I fixed it! it works!
I had to remove the static ip that was being enforced on the target computer and use DHCP reservation on the modem and that seemed to do the trick.
rocketboy2000
6 years agoFriendly Neighbour
thanks so much for the assistance Nighthawk!
the only thing i've adjusted was under LAN IP settings i set the modem IP address to 192.168.0.254 from 192.168.1.254 and the IP addressing values to 192.168.0.1 and 192.168.0.253 in the same way as i have static IP devices already configured.
maybe i should try adjusting those static values to dynamic values and switching back to 192.168.1.254? or is there some other item i'm missing?
rocketboy2000
6 years agoFriendly Neighbour
can anyone else assist me with this? my modem is not port forwarding!
would it be easier if I just bought another router and installed behind the modem? this is the config I had with Shaw and it worked perfectly fine.
- rocketboy20006 years agoFriendly Neighbour
just to add... the modem and the computer I am trying to port forward to are able to ping each other. external scan says that the port is "filtered".
- rocketboy20006 years agoFriendly Neighbour
sorry, I fixed it! it works!
I had to remove the static ip that was being enforced on the target computer and use DHCP reservation on the modem and that seemed to do the trick.
Related Content
- 6.4KViews2Comments