User Profile
Shawnama
Friendly Neighbour
Joined 3 years ago
User Widgets
Contributions
Re: Inquiring About Possible Solution for TELUS PureFibre Installation Issues
cc: DrPacman I am writing this post for those who are going through the same problem as me and struggling. The solution I originally posted (shown below in the graphic) worked well, but I had to convince my installation technician to give a try SFP module into UFiber ActiveEthernet. I prepared everything (UFiber, PoE adopter, cables) before the technician came. Once he showed up I explained what my problem currently having, then asked him to bring SFP module to insert to UFiber. Activating SFP module took almost 30 minutes, I had to restart the UFiber multiple times, and the ethernet cable had to be connected to a device (in my case, it was connected with a MacBook with USB-c ethernet adopter) in the my media room. Finally the SFP module got activated and fed internet to my device, then I connected it into my router. Finally I have Gigabit internet through TELUS Pure Fibre!9.5KViews0likes1CommentRe: Inquiring About Possible Solution for TELUS PureFibre Installation Issues
I see, sadly the technician came to my property, he said he can't install fibre into my media panel (hub room), suggested alternative way, like run fibre around garage and install wifi there, none of them was acceptable. then he asked me to cancel the installation appointment and I cancelled via text. He said pulling the fibre cable into my hub room should be done by a low voltage technician.. and I have zero idea who can do this. Anyways thanks for your help. I will try to contact TELUS presales regarding this. Thank you!10KViews0likes1CommentRe: Inquiring About Possible Solution for TELUS PureFibre Installation Issues
DrPacman I think I explained a bit wrong. I have attached a diagram how I am trying to solve my problem. The fibre is in my service box, but it is not able to bring to my hub room, because there is no fibre cable when the house was built. However, there is CAT6 Cable and COAX...10KViews0likes3CommentsInquiring About Possible Solution for TELUS PureFibre Installation Issues
I recently experienced a cancellation of my TELUS PureFibre installation due to the absence of a fibre connection from the outdoor telecommunication service box to my home's hub room. Currently, I only have CAT6 and COAX cables running from the service box to the hub room. I've been considering a potential solution and would appreciate your thoughts on it. I'm contemplating the purchase of a UFiber Active Ethernet device - a fibre to Ethernet converter powered by Power Over Ethernet (POE). I believe that the POE adaptor could be installed in my hub room, while the UFiber device could be situated in the service box. Also, I'm curious to know whether the installation technician might be equipped with an SFP module. I would greatly value your opinions and advice on this matter. Thank you for your time. Best regards, ShawnSolved10KViews0likes10Comments