User Profile
Serpentor
Neighbour
Joined 9 months ago
User Widgets
Contributions
Re: Telus Pure Fibre in Ontario - PPPoE
Does your router have logs for the PPPoE authentication? If you're in Ontario (Bell last mile), they use PPPoE. I set my NH20A to bridge all interfaces. From what I've read, some people have had to factory reset the NH20A then put it in bridge mode for it to work.1.6KViews0likes4CommentsTelus Pure Fibre in Ontario - PPPoE
This isn't really a question, it's just FYI for Ontario (and, I assume, Quebec) customers that have Telus Pure Fibre, delivered on Bell's fibre. In Ontario, Telus has to use PPPoE. Make sure you get the username & password from the tech or call tech support. Settings are accessed from Network > WAN, then clicking the Edit button. Username is in the format of [email protected] MTU should be set to 1492. No service name is required. On my modem, I had to enable 802.1q (VLANs) and set the VLAN ID to 40, and the Priority Bit to 0. You can also check the boxes for the modem to remember these settings even after a factory reset... something the Telus tech apparently did not do. If you're going to try to get the router to work in bridge mode so you can use your own firewall/router/APs, you will need this information. Good luck!2.2KViews0likes9Comments