User Profile
gemosley
Friendly Neighbour
Joined 3 years ago
User Widgets
Contributions
Re: Programming Slimline2 for New Sony TV
One small glitch discovered after posting the solution above. With my previous TV (an LG), The Optik button on my Slimline2 remote would power on both the TV and the STB. The image on the screen was the Telus green with a prompt tp press OK for Telus/Optik programming. The appeal of this was that, for the most part, I only had to use (and find) one remote. Now, with the new Sony, the Optik button has been set to turn on both TV and the STB but the screen displayed depends on what was last used. In other words, there's no guarantee I'll get the Telus Home screen. Any ideas on how to default to the Telus Home screen when powering on?9.8KViews0likes1CommentRe: Programming Slimline2 for New Sony TV
This was the set of steps I followed at the beginning of this increasingly hopeless quest. While my initial post said the Slimline2 was able to control volume that's certainly not the case now. The Apps function works as do the four buttons that surround the OK centre button. Pause, Start, FF and Skip all work on Optik TV content as well. Can't use the Optik remote to turn the TV on/off or to Mute or control volume. Frustrating.9.9KViews0likes1CommentRe: Programming Slimline2 for New Sony TV
Thanks. I tried all 11 codes in the list for Sony. They all blinked yellow (for amplifier). Also tried code 0029. Two red blinks after entering code. Another single red blink after about 10 seconds or so but nothing more after that. Tried pressing and holding TV power button after that which caused a yellow light to stay on but still no control of TV.10KViews0likes5CommentsProgramming Slimline2 for New Sony TV
Just got a new Sony XR65A95L TV and can't get my Slimline2 remote to control both. Did a factory reset on the remote Following the step-by-step guide: 1. Pressed Options button till 2 green blinks 2. Entered code 1466 and got 2 red blinks 3. Pressed (and held) TV button for several seconds Red power light on TV blinked but TV did not turn off 4. Now Optik button turns STP off and on but not TV 5. Slimline2 does, however, control volumeSolved10KViews0likes10Comments