User Profile
sharkannon
Friendly Neighbour
Joined 5 years ago
User Widgets
Contributions
Re: DAC Compatible with T3200
DUH, I feel like an idiot, that's exactly what it was. Logged into the MikroTik and force the ports to 1Gbps (left the Ubiquiti at 10). Everything is working now, the UDM and the T3200 are both connected via DAC's and the fibre is going into the Mikrotik. I love my little setup 🙂 UDM Pro USW PoE Pro 24 U6LR 2x UAP AC IW 1x UAP Nano It's all fun to play with (Yes, this is my home network), thank you very much.7.5KViews1like1CommentRe: DAC Compatible with T3200
Yea, the udm side works fine, the nice thing is, the MikroTik upgrades the connection from 2.5Gbpe to 10Gbps, so that part works. The MikroTik to the Telus t3200 is the issue 😞 I only have 1 4k box, and only use it once in a while, but just hoping to get it all working as I want 🙂7.6KViews0likes3CommentsRe: DAC Compatible with T3200
DrPacman wrote: Good after noon... For a little clarification please... What speed internet do you currently have? If you have the Telus Gpon connected directly to the Mikrotik switch I presume you have the 2 separate WAN IP addresses issued by Telus correct? I have 1Gbps up/down, so no real benifit atm of all these upgrades, but I like to play. As for the Mikrotik, I have the GPon plugged in to the Mikrotik switch and have 2 seperate WAN IP's. And the Mikrotik is passing the signal through to your UDM? Please confirm that you have a UDM Pro? As well, please clarify for me if you would be so kind. When you say you could just continue to use the Ethernet cable, I surmise you have a SFP to RJ45 adapter connected to you Mikrotik ? And then the RJ45 cable connects to the white WAN port on your T3200? Or, are you connecting the RJ45 Cable into the POE/ETH port 1 on the CRS305? I do have a UDM Pro, yes. I have the Ethernet cable plugged into the RJ45 Eth/PoE port on the Mikrotik switch (the switch is set to SwitchOS, so acting purely as a switch atm) and then into the WAN port on the T3200, yes I have found that the 10Gtek DAC Cables SFP+ Twinax Cable, Passive, Compatible with Ubiquiti, from Amazon seem to work just fine with my system. and at around $10.00 - 15.00 buck not a bad deal... Thank you, and look forward to continuing the dialog... Cheers Those are the DAC's I'm currently using, but for some reason the T3200 doesn't seem to want to connect to the switch using it. I've used the known working cable that I have in the UDM, and it's not working either when plugged into the T3200.7.5KViews0likes5CommentsDAC Compatible with T3200
I've got a setup at home, where I have my Fibre going into a Mikrotik CRS305-1G-4s+IN, then split between my UDM and my Telus T3200. I originally had the Fibre directly to my UDM, but because it only can negotiate at 1Gbps (UDM limitation), I added the Microtik switch in there. I added by Telus router back in, so I could get my Optik TV Boxes working (at 4k), but currently I have the T3200 connected via ethernet because the DAC I have doesn't seem to work. I currently have 2 DAC's, one is a ubiquiti compatible one, and the other, I thought was a Cisco one, but neither seem to work on the T3200 side. Could I just keep using the Ethernet cable? Yea, but I'm OCD and was using the Ethernet port for PoE/mgmt, so would prefer to go back to that if I could.Solved7.7KViews0likes11Comments