User Profile
sguilts
Neighbour
Joined 5 years ago
User Widgets
Contributions
Re: PureFibre + OptikTV - integration issue with existing mesh wireless system
If you are running your Orbi in default "Router Mode", then try doing the following: From the Orbi web GUI, go to: Advanced -> Setup -> WAN Setup Then unclick the box that says "Disable IGMP Proxying". This will allow IGMP messages to pass thru the NAT from WAN to LAN side, which is required by Optik TV If you have already switched your Orbi to "AP Mode" then this is not required as no NAT function enabled in AP Mode. After making the changes, you will need to restart the DVR then the STB(s) and wait for them to resync. Note that I did not make any of the IP address reservation changes you listed out. I have my Telus router with 192.168.1.x subnet and Orbi with 10.0.0.x subnet. All of my devices (including DVR & STBs) are on 10.0.0.x subnet. I also did not enable the bridge mode on port1 on Telus router. Note that I am currently have Telus Fibre and am using Telus Arcadyan router. However, I had same setup working previously with Actiontec T3200 on VDSL prior to updating to fibre.4.7KViews1like1Comment