User Profile
Kalhas
Joined 9 years ago
User Widgets
Contributions
Re: 1 Gig to 3 Gig Purefibre Internet not 3 GIG
I think before anything inspect your topology. since the 10gbit port is occupied by your PC , what is the speed of the port your ONT is connected to the telus hub - white square box. If you don't mind, give us a bit more info on the set up2.4KViews0likes13CommentsRe: How to setup Fiber 5gbps to multiple devices
The device you posted from amazon seems to be an intelligent switch and that is ideal; no need for network noise. as bridge vs routing goes, that is totally biased on your desired topology; I am not sure on the technical capabilities of posted switch, but I would bridge the 10g port to the port of the switch that has the ONT connection and use the reminder on the YuanLey device to act as a switch. If I understood what you want to achieve. If isolating ports is not possible on that switch maybe routed is what will work best for you964Views0likes0CommentsRe: Slow wifi speeds with gigabit
hi there jgg123 Wireless speeds is also dependent on signal noise that might exist in your neighborhood; the more clustered houses are the worse the results. I would test first using a hardwired connection (using ethernet network cables). the most reliable test happens through iperf v3 and not your usual flash web browser app. note: your network test also is limited on the capacity of the server on the other side to meet the speeds.7.4KViews0likes0CommentsRe: Fibre Outage in Edmonton?
I would first restart the router; there were no outages on Fibre as far as i know. Have you tried checking your DNS on your computer? please contact TELUS support ( https://www.telus.com/en/bc/support/contact-us ) in case your problem persists. Regards, Kalhas3.5KViews0likes0Comments