06-28-2018 03:08 PM
Hey all, really weird one here. I've talked to Tech Support, the guy who installed the boxes, and no one can figure it out. It's a Sharp TV, 1080p, good enough for my mother-in-law, and when I go on the website, there's no codes for the TV model, so I get 12 to try, 1 works.
Small detail here, I know, but might mean something. During programming, you enter the code, light beside the TV button flashes. Press the TV button, then the OK button. When you press the OK button, the light beside the TV button is supposed to flash, but the light beside the Optik button comes on instead.
Anyways, I finish programming, and the TV function is so erratic, it's useless.
Now this is for my cognitively impaired MIL, change is not good.
06-28-2018 03:22 PM - edited 06-28-2018 03:24 PM
Only 12 codes? There are more than that available for Sharp:
1179 1402 1746 1376 1301 1927
1669 1656 1639 1375 1182 1180
1932 1779 1747 1720 1638 1530
1517 1290 1212 1181 1178 1152
Also when programming, do you press and hold the TV button until the TV turns off, before hitting OK?
There is also:
Power sync your digital box and TV
06-28-2018 03:34 PM
I was referring to the 12 codes given on the website. I got the codes you listed from an email from my installer.
As for button combo, yes, I press OK after I press the TV button.
And I always power sync when I do a test.
Thank-you for your insights though, good to know I'm on the right track.
06-28-2018 03:50 PM
As long as you press OK after the TV shuts off, that should work.
If you haven't already, I'd try every code listed for Sharp. Depending on the age of the TV, one of those should work. Some may only allow certain functions like to turn it on, but not off.
Plus, the codes I posted were from the website. You just had to scroll down to downloads to find the Additional Code list. 🙂
06-28-2018 03:52 PM
I'll give it a try, and let you know how it goes. Thanks for the help.
06-28-2018 04:20 PM
Nope. A few of the codes, 4 or 5 would erratically shut the TV off and on, just like the blanket one 1179, I can't get the TV lights to flash when I press okay, only the Optik light comes on. Something wrong with the remote?
06-28-2018 05:09 PM - edited 06-28-2018 05:09 PM
What is the date of manufacture on the TV and model.
06-28-2018 05:36 PM
Sharp LC-42LB261U Mfg. Date - Sept. 2014
If you can work some voodoo, that would be sweet. One thing I will tell you, the Slimline 2 with her 1080p wireless box worked just fine.
06-30-2018 02:51 PM
Okay, so I swapped remotes, and now the lights flash in the right place, but the result is the same. Once I program 0007 into the remote to powercycle both the box and TV at the same time, the box goes off, not the TV. Press again, TV goes off, box comes on, etc, etc. So, I turned the box on, when the TV was on and the box was initially off, same result. Box goes off, TV does not. Does anyone have any ideas, I'm fresh out.
06-30-2018 03:02 PM
Just wondering.... if you look at your Sharp TV remote. Is the button to turn ON the TV, the same button to turn the TV OFF? Or do you use TWO different buttons for ON and OFF?
06-30-2018 03:39 PM
06-30-2018 09:37 PM - edited 06-30-2018 09:40 PM
06-30-2018 10:10 PM
06-30-2018 10:12 PM
If you have the Slim2.... what happens if you push the green Optik button? Does the Optik box and TV both turn on?
What happens if you push the white TV button? Does the TV turn on and off?
07-01-2018 09:22 AM
Once programmed, the Optik button turns on, once, both items. Then, you never know what you'll get with regards the TV. The TV button does exactly what it's supposed to, turn on and off on command. And, before you ask, when the TV is on, and the box off, have I manually turned the box on to sync them? Yes, and when I do that, just the box turns off, again. It's as if the "box off" command overrides everything else that's on. I even tried switching boxes, to no avail. I may have to run a cable over there, since it seems to work on the other 2 Tv's.
07-01-2018 10:58 AM - edited 07-01-2018 11:04 AM
To clarify.... the behavior is....
If the TV stays on, press the TV button to turn the TV off.
Pressing the green button again would turn the Optik and TV on again to repeat the cycle.
Some other thoughts to turning the TV off....
07-02-2018 09:39 AM
Yes, what you're suggesting does work, but I have to take into account my dymentia-plagued mother-in-law. I can't ask her to remember that sequence. I sometimes have to go and turn one or the other on, as she's hit the wrong button.
As for room type, it doesn't matter, bright or dark, and I'm sitting 6ft from the TV when doing all these tests.
07-02-2018 12:11 PM
I too had eldercare issues not long ago. Having the box and TV get out of sync is frustrating.
I ended up using Slingbox to remotely check and fix sync issues when away from the home.
07-03-2018 08:00 AM
07-03-2018 10:07 AM
Maybe the PikTV interface would be easier for her. Live channels only; limited selection of channels, and a single on/off button.
07-03-2018 12:27 PM