10-18-2017 06:31 PM
I talked with Telus support and they told me they only support VOLTE for Telus Note 8.
It basically means that if you purchase Note 8 from samsung, VOLTE simply does not work on Telus due to their weird grey market policy which is not mentioned anywhere in Telus homepage.
Hey Telus please support VOLTE for other Note 8 devices which were not purchased from Telus.
I am feeling cheated as I expected it works on Telus.
Think twice Telus
Solved! Go to Solution.
02-28-2018 10:35 PM - edited 02-28-2018 10:36 PM
10-18-2017 07:15 PM
You'll run into this issue when going to any cell provider with an unlocked device. Not just Telus and not just Canada.
10-18-2017 09:29 PM
You don't see my point.
from https://www.telus.com/en/bc/support/article/about-volte and https://www.telus.com/en/bc/support/article/how-to-use-volte
Telus does not mention this on this pages. If I knew this, I would not post message like now.
They should mention that stupid grey market policy on their page clearly so that people understands what to expect if they purchase phone outside of Telus.
Anyway I am disappointed
10-25-2017 04:48 PM
Just to let you know that you can change the CSC (Carrier Selection Code) for Samsung phones. Basically what it will do is make it so that it runs the official carrier version of the software for the specified intended region. Example: If you buy a Samsung Galaxy Note 8/S8/S8+ in Canada and then get it unlocked, you can then change the software so that it matches any Canadian carrier.
I can confirm this works as I have done this with the following Samsung devices over the years: S4, Note 4, S6 Edge, S7 Edge, S8 plus, A5 (2017).
Please note that when you change the CSC, it will wipe your device and reset it to factory defaults based on the carrier you selected. So make sure you backup all your data before you change the carrier code.
To change the carrier code on your UNLOCKED Samsung Galaxy Note 8:
- Open the dialer app (phone)
- Dial *#06# (make sure you note this 15 digit number and write it down)
- Then dial *#272*IMEI# (where it says "IMEI" is where you need to enter your 15 digit IMEI number)
- You will see a carrier selection screen with codes
- Select the "TLS" code and then select "install" to program your phone with the Telus Samsung Galaxy Note 8 factory image
- You will then need to go through the setup process again
- If you made a backup, once you set it up you can restore your data
VoLTE will now work with Telus as the system will now think it is a Telus phone. Just go into your settings to ensure the VoLTE option is selected.
Feel free to reply if you have any questions.
Cheers!
02-15-2018 11:35 AM - edited 02-15-2018 11:37 AM
02-15-2018 12:15 PM
Is your an international (non-North American) variant? That would be the only reason I can think of as to why you might be having issues.
02-15-2018 12:23 PM
02-15-2018 04:50 PM
Telus support would honestly be better if it didn't exist. Have you had any firmware updates that may have broken something? HD Voice only works when the person you are calling also has an HD Voice compatible device.
02-24-2018 09:53 PM
02-24-2018 10:16 PM - edited 02-24-2018 10:22 PM
Telus' website even states there will be no VoLTE supported on devices not purchased from them. What do you expect the support people do to? The major carriers in Canada (Telus, Rogers, Bell etc) all have a similar policy for devices not purchased through them. It's all based on the devices IMEI #.
https://www.telus.com/en/bc/support/article/about-volte
Note: Most newer devices will be VoLTE enabled as they become available. Devices not purchased from TELUS will not be VoLTE enabled at this time.
02-24-2018 10:46 PM
02-28-2018 06:39 PM
I have a Note 8 purchases in the US. They did get it working just fine. The phone was flashed with a Canadian Note 8 ROM so i could get the proper CSC codes.
The customer agent i got was awesome. What that link proves that you posted is how greedy telus and the others are.
02-25-2018 12:35 AM
02-25-2018 07:09 AM
02-28-2018 02:30 PM - edited 02-28-2018 02:39 PM
02-28-2018 02:40 PM
02-28-2018 02:52 PM - edited 02-28-2018 02:52 PM
02-28-2018 03:13 PM
And again, I have iphone 6 plus devices, purchased from Apple (unlocked and originally on Rogers) that work with VoLTE on Telus. If they were blocking IMEI's from non-Telus phones, why would it be just android?
Finally, for what purpose would they block non-Telus IMEI's? I have a phone. I make calls. The SIM card authenticates me. It makes no sense from a security perspective to block phones from making VoLTE calls specifically and allow them to make 3G calls.
Maybe it needs to be escalated past tier II.
02-28-2018 03:17 PM
02-28-2018 03:38 PM
Good luck.
I had Rogers break something on my Wi-Fi calling once, they had to escalate it and it took quite some time to get fixed. Although I have not had any issues with Telus, I suspect there are a few complications on the carriers' end that can get out of sorts.
I hope you are able to get this fixed, it must be very frustrating.
02-28-2018 06:32 PM
Did you do any security updates?
every time i do these I have to call in and get them to fix it. Everytime i do a security update it some how blocks VOLTE. I also get told that it should work because it is installed. I tell them to read the notes on my account. This usually involves getting the original agent that did this to call me back.
He did tell me that they are not suppose to be doing this. The Volte is only for Telus devices with "special firmware". I told him that this is false. All Note 8 (N950W) have the same build number, regardless if it is bought from Samsung or purchased from telus.
https://www.sammobile.com/firmwares/galaxy-note8/SM-N950W/
i have a Note 8 bought from Samsung Canada as well as a Note 8 bought from Samsung US (Flashed with a Canadian ROM). Neither phone would get VOLTE without calling in.
So I did get it working, but it all depends on the agent you get and their amount of knowledge in fixing your VOLTE profile.